The Flamer is the perfect tool for all your kitchen baking, cigar moxa, stick barbecue, and welding needs. Its precision flame output ensures all your jobs are done quickly and effectively - saving you time and money. Enjoy the expertise of a professional from the comfort of your own home!
Product information:
Wind resistance: Yes
Material: Zinc
Note: How to properly inflate 1. Before inflating, use a small tool to withstand the inflatable core, and completely discharge the residual gas inside, so that the pressure in the lighter gas tank is eliminated; 2. Press the outlet of the gas tank to be vertically downward for about 5 seconds each time, two or three times. 3. Please wait for about 5 minutes after the inflation is completed. If there is still no ignition after 5 minutes, please adjust the valve to a larger size (see the + - symbol). Detailed inflatable introduction instructions: Aeration method 1. When refilling, there must be no sparks or sparks around to ensure safety. Do not refill while smoking; 2. Qualified butane gas should be used, inferior gas may damage the lighter or reduce the service life; 3. When refilling ordinary models, please turn the lighter upside down, align the gas bottle outlet and cover the air inlet of the lighter, and press hard several times for about 2 seconds each time; if the gas cannot be refilled, it may be a gas There is excess air left in the box. At this time, you can deflate it. Use a small screwdriver to align the air inlet to deflate it 1-2 times, and then refill it; 4. When adding air, please use a flat-blade screwdriver and other tools to loosen the screw cover of the air inlet, and then follow the above steps. After refilling, the screw cover can be screwed flat, but not too tight; otherwise, the cover will not be compacted, the sound of the cover will not be crisp, and the gas will escape. 5. When refueling the gasoline engine, the head cover should be opened, the movement should be pulled out and reversed, and the outer sponge should be opened to add an appropriate amount of gasoline. After the gasoline penetrates into the inner sponge, cover it. The outer layer of sponge is then put into the casing; 5. After refueling various lighters, wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature, and wait until the residual gas attached to the lighter is completely volatilized before ignition. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may ignite, causing unnecessary danger. After refilling the gas, if the flame height is too high or too low during use, it is a normal phenomenon, and the flame height can be adjusted appropriately.
Packing list: Lighter*1 (without gas)
Product Image: 
